Fit GD Sports Suspension Kit
Parts# SSK-F1-K (late model)  SSK-F1-M (early model)
Price $1,127.00

Based on the enormous amount of feedback from actual racing and street driving, J’s Racing has developed a stock dumper type suspension kit. The setting targets both street-driving to “spirited” performance driving. The kit is recommended for the customers who 1) would like to reduce the height of your car for a “sports car” look, 2) would like to have a reasonably priced stock type suspension, 3) would like to have increased cornering ability with less body roll, 4) would also like to maintain a comfortable ride for the family.

Spec
Height reduction Front -30mm, Rear -25mm
Spring rate Front 2.8kg/mm, Rear 4.8kg/mm

For North American models, JDM Honda stock stabilizer link ($33.00 x2) is required for the installment due to the geometry difference

Fit GD Special Dumper Full Length Adjustment Kit
Parts# DSPL-F1 Price $6,821.00

Jointly developed with CRUX Engineering, a premier performance / racing suspension manufacturer. The products are designed from enormous data collected from countless field tests on the race track. The stroke, dumping force, gas pressure are all optimized to achieve the best lap times. Feedback information is used to manufacture the best street / performance suspension kits for our customers. This is the ultimate suspension for Fit. CRUX’s name might imply “racing suspension”. However, each system is hand made to meet J’s racing specification and the smoothness of the system also provides a comfortable ride on the street.

Standard kit
Aluminum body damper (front / rear) with the 30 stages adjustable dumping force HYPERCO Spring (several choices are offered to match your driving stage)
Aluminum upper sheet front & rear
Aluminum retainer
Bump rubber
Dust boots

For North American models, JDM Honda stock stabilizer link ($33.00 x2) is required for the installment due to the geometry difference

Fit GD Wide Tread Spacer 15mm
Parts# WTS-F1-15 Price $206.00

The 15mm spacer is made of duralumin and the bolts are Chromium molybdenum steel (chrome-moly). PCD 100, holes 4, and pitch 1.5. Manufactured by precise forging, it is very strong and light. A set of two.

Fit Super Taikyu Long Hub Bolt
Parts# LHBSS-F1-15 Price $33.00

Designed for Super Taikyu Racing, (Super Endurance Race Series). Tapering the tip of the bolt makes it easier to change the tires and at the same time prevents costly mistakes while racing. Made of chrome-moly (SCM435) and with a special heat treatment application, the SCM435 will provide additional strength.

Size M12 x P1.5
Extension 15mm
Spline (threaded area) diameter 12.3mm
Total length 76mm

Fit FF Roll Center Adjuster
Parts# FCJ-F1 Price $284.00

The roll center adjuster corrects the roll center geometry and achieves the perfect setting you desire. The lower arm angle on a low-built car tends to be far from ideal and the roll center point can move to a far lower position. The deviation of the roll center from the center of gravity results in a deteriorated cornering force due to the increased body roll. The roll center adjuster rectifies the situation and produces the ideal suspension geometry.

[Results] Reduced roll, increased stability of the tires, sharper steering response, and faster corning!

This product is to be used for Fit whose height is reduced more than 20mm.

Fit FF Roll Center Adjuster Arm ASSY left
Parts# FCJA-F1-L
Fit FF Roll Center Adjuster Arm ASSY right
Parts# FCJA-F1-R
Price $343.00

Our Roll Center Adjuster is pre-installed on your stock arm. There is no further assembly required and makes installation very easy.

** This item does not fit U.S Fit. However, J's can make the one using the arm for the U.S model.
FCJA-F1-L-US, FCJA-F1-R-US    Price $362.00