DC5 Type S Side Skirt w/ Carbon Under Panel
Parts# JSS-T5-C Price $1,026.00

It is very important to keep low pressure underneath the car so that the higher pressure above the car will effectively apply added down-force. By extending the width of the body and significantly reducing the air sucked from both sides, the Type S Side Skirt w/Carbon Under Panel is designed to maintain an area of low pressure underneath the car. In case the product is damaged by a ground contact, the customer can replace only the lower portion of this product.

The set comes with left and right side skirt carbon panels.

* The Type S Side Skirt is also avaliable with FRP under panel. JSS-T5-F $766.00

DC5 Type S Rear Bumper w/ Carbon Canard (early model)
Parts# JSR-T5M-C
DC5 Type S Rear Bumper w/ Carbon Canard (late model)
Parts# JSR-T5K-C
Price $1,069.00

The Type S Rear Bumper is designed to reduce the “parachute” effect (air mass trapped inside the rear bumper increasing drag) by adding several ducts. The new side fin shape structure streamlines the air on the side of the car and contributes to more down-force. Our set comes with rear bumper (FRP) and carbon rear canard.

JSR-T5M-C fits DC5 model # 100 to 220 and JSR-T5K-C fits model #230

DC5 Front Carbon Canard
Parts# CCN-T5 Price $406.00

The DC5 Front Carbon Canard creates a strong front down-force that enables faster corning speed. It also produces an excellent balance between the front and rear when our GT wing is installed. A set comes with left & right canard and the stainless bolts & nuts. It is designed for the stock front bumper. It requires drilling on the bumper to install the product.

DC5 Front Wide Fender
Parts# JSWF-T5 Price $634.00 for a set of two (each side can be sold separately)

The fender is specifically designed for DC5 for the perfect fit and it provides an extra 15mm over the stock fender enabling a use of wider tires for more traction. The duct on the fender streamlines the air turbulence from the wheel spin, which effectively reduces the drag.

The wide fender blends beautifully with the other stock parts and enhances the high-class image of your DC5. Painting is required.