Home -Company profile -New products Product -Accord CL7 ACURA TSX -S2000 -Fit GD -Fit GE -Integra DC5 ACURA RSX -Integra DC2 -Civic FD -Civic EG -CR-X -CR-Z -Wear -Sticker -Others Media -Gallery -Videos FAQs Dealers Contact 
click for PPI homepage |
J's Racing S2000 Aerodynamics partsS2000 3D GT-Wing S-Tai Type 2 Center Mount - Wet Carbon Our 3D-GT Wing S-Tai Type 2 is a race proven wing, thoroughly tested and with excellent results at the Super Taikyu (Endurance Series). The structure is a double wing type with a width of 1,390mm and made of wet carbon. By relocating the mounting toward the center of the car, the height of the wing is set higher than the trunk mount type, which makes it possible to produce the same down-force as the 1,600mm type and to also reduce drag. The angle is adjustable by 15 stages (5 x 3) which is highly effective in all forms of races. J’s Racing recommends the use of the center mount reinforcement kit with this GT wing.   S2000 Center Mount Reinforcement Kit The kit provides two FRP panels to be installed in the rear area sides of the trunk. Panels reinforce the trunk area to prevent deformation. The reinforced structure will increase the effectiveness of the GT wing.   S2000 3D GT Wing S-Tai Type 1 Wet Carbon S2000 3D GT Wing Type 1 Wet Carbon (1,600mm) The 3D GT Wing S-Tai Type 1, is a single type wing with a 1,390mm width and 195mm height. The standard Type 1 has a width of 1,600mm and a height of 195mm. (245mm height is available as an option). The wing angle is adjustable by 15 stages (5 x 3) and will provide the best setting for your driving requirements. The design of this wing will reduce drag and produces a very high down-force for medium to high speed race tracks. To install this Wing, you will be required to drilling into the truck.   S2000 3D GT Wing S-Tai Type 2 Wet Carbon S2000 3D GT Wing Type 2 Wet Carbon (1,600mm) This GT wing is race proven in the Super Taikyu (Endurance Series). With a double wing type structure, this GT Wing has a width of 1,390mm and of a height of 195mm and made of wet carbon. The standard Type 2 has a width of 1,600mm and a height of 195mm (245mm height is available as an option).. The angle can be adjusted by 15 stages (5 x 3) which will be highly effective at all types of race tracks.   S2000 3D GT Wing Type 1- Dry Carbon This is the best single GT wing type available. It is made of dry carbon for ultimate lightness and strength. Our single wing type has a 1,600mm width and 195mm height and the angle is adjustable in 15 stages (5 x 3) which will allow you to select the best setting for your driving requirements. The design of this wing reduces drag and produces greater down-force for medium to high speed race tracks. Drilling on the truck is required for installation.   S2000 3D GT Wing Type 2 -Dry Carbon The best double wing type GT wing on the market. Our GT Type 2 Wing is made of dry carbon for ultimate lightness and strength. Our double wing type has a 1,600mm width and 195mm height. The angle is adjustable in 15 stages (5 x 3) for super effectiveness in all types of race tracks.   S2000 3D GT Wing Type 1 Wet Carbon Low Mount For the customer who would like to have a slightly conservative appearance, this single type wet carbon GT wing utilizes 100mm mount instead of 195mm. The 1,600mm width generates strong downforce even at a middle speed. The angle is adjustable in 15 stages (5 x 3) for maximum effectiveness in all types of race tracks.   GT Wing Cover This product is made of polyester with a 3 layers coating on the surface for waterproofing. A fleece like material is attached on the backside of the cover, which balances the durability and air permeability at a high level. The cover fits all the J’s racing 3D GT wings including 1600mm type II. Flexible rubber makes it very easy to attach / detach. This cover protects your investment from all the weather related factors like UV, rain, and snow. *warning Do not drive the car with cover attached.   S2000 Type V CFRP/FRP Aero Hood The aero-dynamically designed V shape ducts drastically improve the dissipation of heat and is also very effective in lowering water temperature, oil temperature, and intake air temperatures. The carbon fiber clothes are expertly attached by our highly experienced craftsmen for a state-of-the-art appearance. This product is lighter than a stock hood but is as strong as a stock hood. The stock hood hooks can be utilized with this product. However we recommend that you use hood pins for racing use. Without any modification needed, our hood fits the J’s Racing Tsuchinoko intake system perfectly. Construction Carbon FRP (CFRP) / FRP – underside Option Aluminum net, inner protect, & clear coating.   S2000 Type V FRP Aero Hood The Type V FRP Aero Hood is made of FRP for the customers who would like to paint the hood to match your body color. The aero-dynamically designed V shape ducts drastically improves the dissipation of heat and is very effective in lowering water temperature, oil temperature, and intake air temperature. This product is lighter than the stock hood but is as strong as the stock hood. The stock hood hooks can be utilized with this product. However, for racing use, J’s Racing recommends the use of hood pins. There is no modification required to fit the J’s Racing Tsuchinoko intake system to our hood. Construction FRP Option Aluminum net, inner protect, & clear coating.   S2000 Type V CFRP Aero Hood Both the top and underside of our hood are made of carbon FRP which has reduced the weight further from our CFRP/FRP model without scarifying strength. The aerodynamically designed V shape ducts drastically improves the dissipation of heat and is very effective in lowering water temperature, oil temperature, and intake air temperature. The carbon fiber clothes are attached exquisitely by experienced craftsmen for a state-of-the-art appearance. This product is lighter than a stock hood but is as strong as the stock hood. The stock hood hooks are utilized with this product however, for racing use, J’s Racing recommends the use of hood pins. There is no modification required to fit the J’s Racing Tsuchinoko intake system to our hood Construction Carbon FRP (CFRP) Option Aluminum net, inner protect, & clear coating.   S2000 Wide Body Aero System Type GT New The J’s Racing Wide Body Aero System has been created to maintain the S2000 as one of the top, pure sport/performance cars with state-of-the-art technology. In addition to the excellent GT car appearance, the System widens the “wheel tread” and increases the downforce for unrivaled cornering speed and stability. The cooling efficiency has also been greatly improved.   |