J's Racing S2000 IntakeS2000 Tsuchinoko Intake System This is the ultimate air intake system for the S2000. It aids in the flow of cooler fresh air from the front bumper area and increases the throttle response by making full use of the air reservoir structure. The intake duct is installed at the lower part of the front bumper which allows fresh air to go through the high-efficient air filter & box. The system can provide much colder and dense air to the engine than a stock intake system. Specify if your S2000 is AP1 or AP2 when ordering. For a driver who uses an oil catch tank, J's Racing has a chamber which does not have the bleed nipple. Please specify this when placing your order. For the customers who have J's Racing Type S front bumper, please choose the TCC-S1-TS. NOTE: Due to the complexities of the installation, J's Racing recommends a professional installation at a reputable performance shop. Minor modifications are required at the back side of a stock hood, stock bumper, and stock air guide. It can be used with J's Racing strut tower bar. The product might interfere with other company's tower bar S2000 Tsuchinoko Intake System Replacement Air Filter A replacement air filter for S2000 Tsuchinoko Intake System. By using K&N cleaner kit (sold separately) the filter can be used repeatedly for a longer duration of time. S2000 Maxflow air filter for AP1 After a long research & development period, J’s Racing proudly presents an air filter which is very easy to service but significantly increases horsepower. The Maxflow air filter achieves both high dust filtration efficiency and a high airflow rate. The Maxflow filter utilizes a newly developed special gauze which collects more than 90 % of the dust & particles and will provide 100% more airflow than a conventional paper filters. It promises the high performance which you will not receive from other stock replacement filters. S2000 Carbon Air Duct for Stock Hood Our product is designed to be used with a stock air intake box and the stock hood. It can provide cooler fresh air to the system and produce more horsepower. S2000 Carbon Air Duct for Type V Hood The product is designed to be used with the stock air intake box and the J’s Racing Type V Hood. It can provide cooler fresh air to the system and produce more horsepower. It is wider than the AID-S1-N (carbon air duct for stock hood) for more air inflow. S2000 65Ø Big Throttle Body (AP1) Butterfly diameter 65Ø and intake diameter 70Ø With the larger butterfly diameter 65Ø (vs stock 62.5Ø), J’s Racing big throttle increases the intake air mass which consequently increases power & torque. S2000 DBW Big Throttle Body Butterfly diameter is 66.5Ø and the intake diameter is 70Ø With the larger butterfly diameter of 66.5Ø (vs stock 64Ø), J’s Racing Big Throttle increases the intake air mass which consequently increases power & torque. It fits only the AP2 with DBW (Drive By Wire) function. |