S2000 Rear Hub w/ Long Hub Bolt 10mm
Parts# HA-S1-R10 Price $186.00

We have installed our 10mm long hub bolts on a stock rear hub which will alleviate the need for a time consuming hub bolt change. The price below is for one hub with 5 long bolts installed.

S2000 Rear Hub w/ Long Hub Bolt 20mm
Parts# HA-S1-R20 Price $199.00

We have installed our 20mm long hub bolts on to a stock rear hub which will alleviate the need for a time consuming hub bolt change. The price below is for one hub with 5 long bolts installed.

S2000 Front Hub w/ Long Hub Bolt 10mm
Parts# HA-S1-F10 Price $199.00

We have installed our 10mm long hub bolts on to a stock front hub which will alleviate the need for a time consuming hub bolt change. The price below is for one hub with 5 long bolts installed.

S2000 Front Hub w/ long hub bolt 20mm
Parts# HA-S1-F20 Price $212.00

We have installed our 20mm long hub bolts on a stock front hub which will alleviate the need for a time consuming hub bolt change. The price below is for one hub with 5 long bolts installed.

S2000 Super Taikyu Long Hub Bolt
Parts# LHBSS-S1-15 Price $35.00

Designed for Super Taikyu Racing, (Super Endurance Race Series). Tapering the tip of the bolt makes it easier to change the tires and at the same time prevents costly mistakes while racing. Made of chrome-moly (SCM435) and with a special heat treatment application, the SCM435 will provide additional strength. Size M12 x P1.5 Extension 15mm Spline (threaded area) diameter 12.3mm Total length 76mm

[The price is for one bolt.]

S2000 S-tai HQI Rear Hub
Parts# KHA-S1-R Price $322.00

Our S2000 S-tai HQI Rear Hub was developed from the valuable experience at the Super Taikyu (Endurance race series). When your S2000 is driven to it’s limits for a long duration of time, the overall “load” and the high surface temperatures that can become as high as 800C, to the hubs (especially rear) will frequently damaged the stock hubs. In order to solve this problem, J’s Racing designed a super strong hub by applying High-Frequency Induction Hardening (HQI) to the stock hub. This application will assist you in surviving a 24 hour race without any incident. After numerous tests and trials, J's Racing has perfected the process for your stock hub.

NOTE: High-Frequency Induction Hardening (HQI) – HQI is a heat treatment method where the only necessary areas of material are exposed to the rapid heat and cooling. This process creates an extremely hard surface without affecting the internal areas.

S2000 S-tai HQI Front Hub
Parts# KHA-S1-F Price $322.00

This is our special front hub strengthened by High-Frequency Induction Hardening (HQI). Please refer to HQI Rear Hub for more information.